Dry Walls			Masonry
Partition Frames This is the partition fire door frame, made by conventional brake press methodologies. Suitable for use on fire rated plasterboard partition walls. Up to four hour fire rating. Steel or timber studs may be used.			Brick and Block Work Walls Standard brake pressed frame. Suitable for use in non-rated, one, two, three and four hour brick and block work walls. Frame must be back filled for all fire ratings.
Standard Frame with welded Straps. For use in non-rated and one hour fire rated partition walls. Steel or timber stud may be used.			Concrete Walls and Retrofit Installations Standard brake pressed frame. Suitable for use in non-rated, one, two, three and four hour concrete and previously existing walls. Frame must be back filled for all fire ratings.
Standard Frame with Won-Doors Snap Strap Fixing. Won-doors new, innovative, environmentally friendly corrosion resistant, no welding strap. for use in non-rated partition walls.			Double brick or block work
Standard Frame with Stud Clip Fixing This method of fixing standard press brake frames is suitable for use in non-rated partition walls. Steel or timber studs may be used.

Mansonry Weather Moulds  (Cavity Flashings)
Weather mould opposite hinge - door opens into building	Weather mould hinge side - door opens to outside building	Broader profile to wrap around cavity wall

---

Non Rated Frames

If the frames are non rated the following frame fixing may be used.
1. Wire Ties for throats up to 150mm
2. Block Ties for throats over 150mm
3. Stud Clips for stud frames (16 per set)
4. Strap Fixing for stud frames - channel welded into back of throat
5. Partition (with fins or flange) for stud frames
6. Countersunk holes for retro fit (fitting into existing openings)
7. Tube Fixing same as countersunk with tubes welded to back
8. Won-Door Snap Strap Fixing new innovative, environmentally friendly corrosion resistant NO WELDING STRAP 

Standard non rated (NR) profiles

(All measurements in mm)

• 1.1mm zincanneal steel. 
• Rebate to suit doors up to 35mm thick. 
• Throat dimension 'X' is variable to suit wall thickness. 
• Heavy duty 100mmx75mm loose pin zinc coated hinges. 
• 1 universal striker  
• 1 x Set wire ties  
• Ramset Feet

• 1.1mm zincanneal steel. 
• Rebate to suit doors up to 40mm thick. 
• Throat dimension 'X' is variable to suit wall thickness. 
• Heavy duty 100mmx75mm loose pin zinc coated hinges. 
• 1 universal striker 
• 1 x Set wire ties  
• Ramset Feet

---

Fire Rated Frames

If the frames are non rated the following frame fixing may be used.
1. Wire Ties for throats up to 150mm
2. Block Ties for throats over 150mm
3. Strap Fixing for stud frames - channel welded into back of throat
4. Partition (with fins or flange) for stud frames
5. Countersunk holes for retro fit (fitting into existing openings)
6. Tube Fixing same as countersunk with tubes welded to back

 

Standard Fire Rated (FR) Profiles

(All measurements in mm)

Mini fire door frames

• 1.1mm zincanneal steel.  
• All frames fire tested up to two hours. 
• Rebate to suit doors up to 38mm thick. 
• Throat dimension 'X' is variable to suit wall thickness. 
• Heavy duty 100mmx75mm loose pin zinc coated hinges as standard. 
• 1 universal striker

Maxi fire door frames

• 1.4mm zincanneal steel.  
• All frames fire tested up to four hours. 
• Rebate to suit doors up to 47mm thick.  
• 1 universal striker 
• Throat dimension 'X' is variable to suit wall thickness. 
• Heavy duty 100mmx75mm loose pin zinc coated hinges as standard